marcogaio,
> Ahem... some hint/feedback on how the same kernel
> boot from USB and return 'CRC error' on sata?
>
It usually happens if
1. After the uImage was generated, you forgot to do a sync before reboot.
2. the uImage was a wrong type, e.g. generated for a different architecture.Things like that.
This problem would go away if you regenerate it on the ix4-200d, and do a few syncs before reboot.
> Ahem... some hint/feedback on how the same kernel
> boot from USB and return 'CRC error' on sata?
>
It usually happens if
1. After the uImage was generated, you forgot to do a sync before reboot.
2. the uImage was a wrong type, e.g. generated for a different architecture.Things like that.
This problem would go away if you regenerate it on the ix4-200d, and do a few syncs before reboot.