this is k4.8
maybe there is a problem with the dtb....its detected as "OF: fdt:Machine model: Seagate GoFlex Net" but i installed the ix4-200d.dtb from your link...maybe there is the problem located...
maybe there is a problem with the dtb....its detected as "OF: fdt:Machine model: Seagate GoFlex Net" but i installed the ix4-200d.dtb from your link...maybe there is the problem located...
Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 PREEMPT Sat Oct 8 03:11:43 PDT 2016 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt:Machine model: Seagate GoFlex Net [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sdc1 rootfstype=ext3 rootdelay=5 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 502252K/524288K available (6149K kernel code, 614K rwdata, 1664K rodata, 308K init, 318K bss, 22036K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0609658 (6150 kB) [ 0.000000] .init : 0xc07dd000 - 0xc082a000 ( 308 kB) [ 0.000000] .data : 0xc082a000 - 0xc08c391c ( 615 kB) [ 0.000000] .bss : 0xc08c391c - 0xc0913170 ( 319 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000496] Console: colour dummy device 80x30 [ 0.000528] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 0.090101] pid_max: default: 32768 minimum: 301 [ 0.090306] Security Framework initialized [ 0.090454] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090476] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.091504] CPU: Testing write buffer coherency: ok [ 0.091879] Setting up static identity map for 0x8200 - 0x8258 [ 0.092124] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.095899] devtmpfs: initialized [ 0.101640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.101893] prandom: seed boundary self test passed [ 0.105648] prandom: 100 self tests passed [ 0.105661] pinctrl core: initialized pinctrl subsystem [ 0.106836] NET: Registered protocol family 16 [ 0.107231] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.130101] cpuidle: using governor ladder [ 0.160096] cpuidle: using governor menu [ 0.160479] Feroceon L2: Enabling L2 [ 0.160522] Feroceon L2: Cache support initialised. [ 0.160924] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.165907] No ATAGs? [ 0.201577] vgaarb: loaded [ 0.201920] usbcore: registered new interface driver usbfs [ 0.202000] usbcore: registered new interface driver hub [ 0.202065] usbcore: registered new device driver usb [ 0.203155] clocksource: Switched to clocksource orion_clocksource [ 0.248931] VFS: Disk quotas dquot_6.6.0 [ 0.249022] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.260925] NET: Registered protocol family 2 [ 0.261729] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.261791] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.261844] TCP: Hash tables configured (established 4096 bind 4096) [ 0.261903] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.261927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.262108] NET: Registered protocol family 1 [ 0.262621] RPC: Registered named UNIX socket transport module. [ 0.262633] RPC: Registered udp transport module. [ 0.262641] RPC: Registered tcp transport module. [ 0.262649] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.262896] Unpacking initramfs... [ 0.989596] Freeing initrd memory: 8144K (c1100000 - c18f4000) [ 0.989712] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.990733] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.990783] audit: initializing netlink subsys (disabled) [ 0.990833] audit: type=2000 audit(0.980:1): initialized [ 0.991132] Initialise system trusted keyrings [ 0.991333] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.991430] zbud: loaded [ 0.992383] NFS: Registering the id_resolver key type [ 0.992408] Key type id_resolver registered [ 0.992418] Key type id_legacy registered [ 0.992435] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.992445] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.992707] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 0.992991] orangefs_init: called with debug mask: :none: :0: [ 0.993487] orangefs: module version upstream loaded [ 0.993770] Key type big_key registered [ 2.553163] random: fast init done [ 5.104932] Key type asymmetric registered [ 5.104947] Asymmetric key parser 'x509' registered [ 5.105024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.105036] io scheduler noop registered [ 5.105044] io scheduler deadline registered [ 5.105078] io scheduler cfq registered (default) [ 5.106375] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 5.107298] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated [ 5.107969] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated [ 5.108484] mv_xor f1060800.xor: Marvell shared XOR driver [ 5.163882] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 5.164110] mv_xor f1060900.xor: Marvell shared XOR driver [ 5.223872] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 5.224352] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.225714] console [ttyS0] disabled [ 5.225773] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 5.812355] console [ttyS0] enabled [ 5.817090] nand: device found, Manufacturer ID: 0xec, Chip ID: 0x75 [ 5.823515] nand: Samsung NAND 32MiB 3,3V 8-bit [ 5.828065] nand: 32 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16 [ 5.835431] Scanning device for bad blocks [ 6.164406] 4 ofpart partitions found on MTD device orion_nand [ 6.170271] Creating 4 MTD partitions on "orion_nand": [ 6.175460] 0x000000000000-0x000000100000 : "u-boot" [ 6.181872] 0x000000100000-0x000000500000 : "uImage" [ 6.188431] 0x000000500000-0x000002500000 : "pogoplug" [ 6.193651] mtd: partition "pogoplug" extends beyond the end of device "orion_nand" -- size truncated to 0x1b00000 [ 6.206786] 0x000002500000-0x00000fd00000 : "root" [ 6.211604] mtd: partition "root" is out of reach -- disabled [ 6.220172] libphy: Fixed MDIO Bus: probed [ 6.224487] libphy: mdio_driver_register: mv88e6085 [ 6.229784] libphy: orion_mdio_bus: probed [ 6.234254] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 6.241616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.248253] ehci-pci: EHCI PCI platform driver [ 6.252784] ehci-orion: EHCI orion driver [ 6.257035] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.262574] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.270488] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 6.303189] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.309466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.316318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.323590] usb usb1: Product: EHCI Host Controller [ 6.328488] usb usb1: Manufacturer: Linux 4.8.0-kirkwood-tld-1 ehci_hcd [ 6.335152] usb usb1: SerialNumber: f1050000.ehci [ 6.340653] hub 1-0:1.0: USB hub found [ 6.344505] hub 1-0:1.0: 1 port detected [ 6.349447] mousedev: PS/2 mouse device common for all mice [ 6.355694] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 6.362755] i2c /dev entries driver [ 6.368697] hidraw: raw HID events driver (C) Jiri Kosina [ 6.374623] drop_monitor: Initializing network drop monitor service [ 6.381128] NET: Registered protocol family 17 [ 6.385814] Key type dns_resolver registered [ 6.390899] registered taskstats version 1 [ 6.395055] Loading compiled-in X.509 certificates [ 6.399913] zswap: loaded using pool lzo/zbud [ 6.421984] Key type encrypted registered [ 6.426734] rtc-mv f1010300.rtc: setting system clock to 2016-10-13 21:14:47 UTC (1476393287) [ 6.437641] Freeing unused kernel memory: 308K (c07dd000 - c082a000) [ 6.444115] This architecture does not have kernel memory protection. Loading, please wait... starting version 231 [ 6.703243] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.849286] SCSI subsystem initialized [ 6.905141] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 6.911903] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.928041] sata_mv f1080000.sata: slots 32 ports 2 [ 6.941639] usb 1-1: Product: USB2.0 Hub [ 6.951494] hub 1-1:1.0: USB hub found [ 6.957848] scsi host0: sata_mv [ 6.961053] hub 1-1:1.0: 4 ports detected [ 6.993880] scsi host1: sata_mv [ 6.997465] ata1: SATA max UDMA/133 irq 32 [ 7.001586] ata2: SATA max UDMA/133 irq 32 [ 7.283187] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 7.434376] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5571 [ 7.441298] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.448678] usb 1-1.3: Product: Cruzer Fit [ 7.452793] usb 1-1.3: Manufacturer: SanDisk [ 7.457104] usb 1-1.3: SerialNumber: 4C531001420607112360 [ 7.475438] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 7.482118] scsi host2: usb-storage 1-1.3:1.0 [ 7.489332] usbcore: registered new interface driver usb-storage [ 7.499385] usbcore: registered new interface driver uas [ 7.533226] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 7.544106] ata1.00: ATA-8: ST3500412AS, CC32, max UDMA/133 [ 7.549709] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.563218] ata1.00: configured for UDMA/133 [ 7.578113] scsi 0:0:0:0: Direct-Access ATA ST3500412AS CC32 PQ: 0 ANSI: 5 [ 8.143201] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 8.154101] ata2.00: ATA-9: ST5000AS0011-1L5178, CC44, max UDMA/133 [ 8.160406] ata2.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.409939] ata2.00: configured for UDMA/133 [ 8.424790] scsi 1:0:0:0: Direct-Access ATA ST5000AS0011-1L5 CC44 PQ: 0 ANSI: 5 [ 8.500804] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 8.513098] sd 1:0:0:0: [sdb] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB) [ 8.523527] sd 0:0:0:0: [sda] Write Protect is off [ 8.528621] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 8.534043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.543444] sd 1:0:0:0: [sdb] Write Protect is off [ 8.550378] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.564332] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6 [ 8.578058] sd 2:0:0:0: [sdc] 124059648 512-byte logical blocks: (63.5 GB/59.2 GiB) [ 8.594048] sd 2:0:0:0: [sdc] Write Protect is off [ 8.599528] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.617782] sdc: sdc1 sdc2 [ 8.621364] sda: sda1 sda2 [ 8.630266] sdb: sdb1 [ 8.637042] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 8.643387] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.650730] sd 1:0:0:0: [sdb] Attached SCSI disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 14.175219] raid6: int32x1 gen() 60 MB/s [ 14.343659] raid6: int32x1 xor() 54 MB/s [ 14.513351] raid6: int32x2 gen() 92 MB/s [ 14.683583] raid6: int32x2 xor() 77 MB/s [ 14.853643] raid6: int32x4 gen() 107 MB/s [ 15.023225] raid6: int32x4 xor() 85 MB/s [ 15.193575] raid6: int32x8 gen() 109 MB/s [ 15.363361] raid6: int32x8 xor() 78 MB/s [ 15.367657] raid6: using algorithm int32x8 gen() 109 MB/s [ 15.373078] raid6: .... xor() 78 MB/s, rmw enabled [ 15.377906] raid6: using intx1 recovery algorithm [ 15.388304] xor: measuring software checksum speed [ 15.483430] arm4regs : 1083.200 MB/sec [ 15.583221] 8regs : 650.400 MB/sec [ 15.683194] 32regs : 900.400 MB/sec [ 15.687394] xor: using function: arm4regs (1083.200 MB/sec) [ 15.722175] Btrfs loaded, crc32c=crc32c-generic Scanning for Btrfs filesystems [ 16.030543] BTRFS: device fsid 2373eb00-e440-4f78-8221-d864b13a4804 devid 1 transid 32578 /dev/sdb1 done. Warning: fsck not present, so skipping root file system [ 16.086324] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem [ 16.110093] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 231 . ok [....] Synthesizing the initial hotplug events...done. [....] Waiting for /dev to be fully populated...[ 18.449336] orion_wdt: Initial timeout 21 sec [ 18.542825] marvell-cesa f1030000.crypto: CESA device successfully registered [ 18.550847] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.552180] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 18.552566] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 18.611809] random: crng init done done. [....] Activating swap...[ 19.742781] Adding 1204220k swap on /dev/sdc2. Priority:-1 extents:1 across:1204220k FS done. [ 19.856119] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [....] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.28.2 done. [....] Cleaning up temporary files... /tmp. ok [....] Mounting local filesystems...done. [....] Activating swapfile swap...done. [....] Cleaning up temporary files.... ok [....] Setting kernel variables...done. [ 22.277069] zram: Added device: zram0 [ 22.304678] zram0: detected capacity change from 0 to 392220672 [ 22.469635] Adding 383024k swap on /dev/zram0. Priority:10 extents:1 across:383024k SSFS Setting up swapspace version 1, size = 374 MiB (392216576 bytes) no label, UUID=611fb34d-14e5-4668-999b-ffe00307199c [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5b1 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Failed to get interface index: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. Failed to bring up eth0. failed. [ 22.981363] NET: Registered protocol family 10 [....] Starting RPC port mapper daemon: rpcbind. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1182 (syslogd) . ok Starting MLDonkey: mlnet. [....] Starting system message bus: dbus. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1180 (klogd) . ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting NTP server: ntpd. ok [....] Starting OpenBSD Secure Shell server: sshd. ok Debian GNU/Linux stretch/sid debian ttyS0