> Now, some more experimenting...
Ok, the new kernel see all the 4 disks in bays. Installing 'mdadm' and 'lvm2' i was able to bind and mount the disks. Good.
There's some things i can do for the project? Dump something? A little strange thing:
Next thing to do, i suppose, is upgrade uboot to be able to boot from disks, right?
Another question: digging into the stock firmware, seems that the display can be driven by a program (that accept a PNG image as option) or via a daemon.
There's some way to use the display in debian? And the two buttons right to the display?
Thanks.
Ok, the new kernel see all the 4 disks in bays. Installing 'mdadm' and 'lvm2' i was able to bind and mount the disks. Good.
There's some things i can do for the project? Dump something? A little strange thing:
root@debian:~# fw_printenv Cannot read bad block mark: Invalid argument
Next thing to do, i suppose, is upgrade uboot to be able to boot from disks, right?
Another question: digging into the stock firmware, seems that the display can be driven by a program (that accept a PNG image as option) or via a daemon.
There's some way to use the display in debian? And the two buttons right to the display?
Thanks.